How It Works

How It Works

The outer piece is the black outer front cover of the dial that has the graphic printed on it. This is the face of the dial and what will be seen when attached to your pellet grill.

The inner piece is the clear/transparent bottom piece of the dial that the magnet screws up against. This is where the pellet flavor label is inserted and removed if needed. You’ll notice an arrow pointing to one of the “supports” that hold the label in place with the words “LABEL END.” Unlike the rest of the supports that hold the pellet flavor label in place, that marked support connects to the outer wall with no gap in front of it (like the rest of the supports have) and is where each end of the label will butt up to when changing out the pellet flavor label.

***Note — Most people don’t use more than 6 pellets so generally don’t ever need to remove the label, however it is possible to interchange labels for those pellet enthusiasts who try a wide variety of pellet types and need to keep track of more than 6 different pellet flavors.

The black circular magnet on the back of the dial also acts as a thumbscrew that holds the inner and outer pieces together. To remove the two pieces  twist the magnet counter clockwise out of the threaded insert and pull the two pieces apart which will give you access to remove the pellet flavor label. 

The pellet flavor label is the piece of paper that goes inside of the clear inner piece. This label is what the 6 pellet flavors go on. We know that different people prefer different pellets. The label can be customized depending on what pellet flavors someone likes most. You can customize the label to have your pellets of choice here.